Minitrix track plans

Track plans for Minitrix (N), laid with the track from the catalogue: R1 194.6 mm, R2 228.2 mm, R2a 261.8 mm, R2b 295.4 mm. Turnouts 14951 and 14953, track spacing 33.6 mm. Every plan closes perfectly and has a parts list, a size and a 3D view.

No plans for Minitrix yet. Make one yourself: enter your track and let the Auto-designer lay a plan that fits.

Open the app

Also in N

• Fleischmann piccolo track planner
• Kato Unitrack N track planner
• Tomix Fine Track N track planner
• Peco Setrack N track planner
• Arnold N track track planner

From the TrackDrawer Guide

• Cork and sound deadening under your track
• DC and AC: two-rail and three-rail explained
• The tightest curve radius in N and what it means for your baseboard
• Sectional track or flexible track: which should you choose?
• The helix: gaining height in little space
• How much space do you need for a Minitrix layout?
• The double slip: when you need one
• Minitrix or Fleischmann piccolo: the differences side by side
• Sidings and buffer stops: why and where
• Train runs jerkily: dirty track or wheels
• Left, right and symmetrical turnouts explained
• Terminus or through station?
• Passing loop: how two trains pass each other
• An N layout on 100 x 50 cm: what fits?
• Your layout will not close: a gap of a few millimetres
• Shunting puzzle: designing a small yard
• Hidden staging and fiddle yards: trains out of sight
• Double oval: two trains at once
• Shuttle line: running back and forth without a loop
• The figure eight: crossing or bridge?
• H0, N, TT or Z: which scale fits your space?
• The dogbone: a long run on a narrow baseboard
• Track spacing: how far apart do two tracks lie?
• Train derails at the turnout: causes and fixes
• The reversing loop: how it works and how to avoid a short circuit
• How to make a track plan in seven steps

Minitrix: articles, geometry and the track planner · All track plans in the Railfolio

TrackDrawer is not affiliated with Gebr. Märklin & Cie. GmbH or any other manufacturer. Item numbers and dimensions are factual product data, with sources cited in the catalogue.