IKEA Lillabo track ideas
A figure eight with the bridge, a long line with two reversing loops or a station on the floor: these layouts are built from the pieces in the IKEA Lillabo sets and checked, so they really close. Pick one, or enter the pieces in your box and let the Auto-designer come up with layouts.
7 layouts to build
Lillabo circle of 8 curves
60 × 60 cm · 8 pieces · 0 turnouts
The smallest layout: eight curves from the basic set make a closed circle.
Lillabo oval from the basic set
110 × 60 cm · 12 pieces · 0 turnouts
The basic set as an oval: two straight pieces and the two bridge parts laid flat between eight curves.
Large Lillabo oval
140 × 60 cm · 14 pieces · 0 turnouts
A longer oval with the long straights from the 50-piece set.
Figure eight with bridge on R205
150 × 100 cm · 16 pieces · 0 turnouts · with bridge
A figure eight that crosses over itself, with the two bridge ramps from the basic set and twelve curves.
Station with two platforms on R205
200 × 145 cm · 16 pieces · 4 turnouts
A station with two platforms on the floor, with four Y junctions.
Lillabo oval with double track
120 × 60 cm · 18 pieces · 2 turnouts
Two Y junctions make a stretch of double track, so two trains can pass each other.
Line with two reversing loops on R200 short
300 × 100 cm · 43 pieces · 2 turnouts
A long line with a reversing loop at each end: the train runs out and comes back by itself. Laid with short curves.
How to make it with your pieces
- Open the app and choose the track system.
- Enter the pieces you have: curves, straights, switches and crossings.
- Let the Auto-designer lay variants, or rebuild a plan from above and check the parts list for what you are missing.
Tips
- Start on the floor: choose the table shape "Floor" in the app and the area grows with what you lay.
- The Y junctions give you passing loops, stations and reversing loops; each reversing loop needs one.
- A figure eight with the bridge needs the two ramps. Plans with a bridge are saved with Pro.
Track systems on this page
More ideas
TrackDrawer is not affiliated with IKEA, the LEGO Group or any other manufacturer. Brand names and article numbers are only used to identify the pieces.